Nibe CLIMACOOL UCR 30, Installation, Operation & Maintenance Manual

Page: 12 / 84

10
www.climacoolcorp.com
Rigging
Each module should be lifted by using lift straps threaded through the steel base cut outs and the use of a spreader bar .
Note: If no spreader bar is used, damage to the unit may occur .
Figure 5
Lifting and Transporting Modules
Pallet jacks or fork lifts are required for lifting and transporting the module . Each module has base cutouts provided for ease
of maneuverability . 60” forks are recommended to prevent damage to the chiller base .
Rigging and Lifting Procedures
Lifting Strap
Spreader Bar
Spreader Bar
Spreader Bar
Lifting Strap
Figure 3 Figure 4