17/36 - Installa
ti
on instruc
ti
ons for the IMM'Ax automa
ti
c immersed safety cover
17
4.8 Fixing the apron to the sha
ft
Fig. 43
- Fixing the cover to the sha
ft
.
- Place the strap fastener plates on the axis opposite the pre-
installed straps on the last slat, place the loop around the
strap fastener then
fi
x it between the tube and the 30 x 80
black plate by
ti
ghtening the screws.
- Check that the gaps of the apron in the pool are evenly
spaced on either side as soon as the rolling starts.
- Correct the posi
ti
on of the strap
fi
xtures if the spacing is
not even.
- Finish the adjustment of the end of run stops once the
cover's slats have been assembled.
- Check the length adjustment of the bungee cords so that
the counterweight does not touch the roll of slats when
rolled in and does not touch the bo
tt
om of the pool when
rolled out.
Fig. 43