Installa
ti
on instruc
ti
ons for the IMM'Ax automa
ti
c immersed safety cover - 14/36
14
4.6 Fixing the an
ti
-li
ft
ing buckles
4.6.1 Fig. 30 & 31
Fix the female loops on the sides 40 mm above the water
line, opposite the an
ti
-li
ft
ing mechanisms pre-installed on
the slats.
4.6.2 Fig. 32 & 33
Op
ti
on for
fi
xing to the pool edge,
fi
x the bracket support
into the concrete belt, under the coping, applying the
bracket against the pool side.
Carry out a clipping and unclipping test on all mechanisms.
Tighten the straps to press (
fl
a
tt
en) the slats against the
wall and provide good pool safety. All of the an
ti
-li
ft
ing
devices must be unlocked to handle the cover and adjust
the run stops.
Fig. 30
Fig. 31
Fig. 32
Fig. 33
