Installa
ti
on instruc
ti
ons for the IMM'Ax automa
ti
c immersed safety cover - 16/36
16
4.7.6 Fig.
39
Before opening, press on the lug and pull simultaneously
upwards to remove the trigger.
4.7.7 Fig.
40
Open the cover to disconnect the system.
4.7.8 Fig.
41
Install the rear harpoon by jamming it in the female part
of the last slat.
4.7.9 Fig.
42
In the case of trapeze or roman stairs, a strap is provided
instead of the harpoon in the sloped or rounded areas.
Therefore you need to:
Unclick the two slats in the place provided, make a two
cen
ti
metre wide notch on the male part, pass the strap
through this notch taking care to leave a washer under the
slat, and clip the two slats. The strap is blocked between
the slats via these two end washers.
The upper washer is used for fastening in the Coverlock.
Fig. 39
Fig. 40
Fig. 41
Fig. 42
