Section 2 — System Set-Up
2 - 5
2.4
Installation and Connection
2.4.1
Installing the ESP6000 Controller Card and Software Driver
Power down the computer. Refer to the computer user manual for
procedures.
WARNING
This product operates with voltages that can be lethal. Pushing objects
of any kind into cabinet slots or holes, or spilling any liquid on the
product, may touch hazardous voltage points or short out parts.
WARNING
Opening or removing covers will expose you to hazardous voltages.
Observe the following precautions before proceeding:
• Turn power OFF and unplug the unit from its power source;
• Disconnect all cables;
• Remove jewelry from hands and wrists;
• Use insulated hand tools only;
• Maintain grounding by wearing a wrist strap attached to
instrument chassis.
Remove the enclosure/housing from the computer. Removal of an enclo-
sure from a representative PC is shown in Figure 2.4-1. Refer to computer
user documentation or contact the computer dealer factory service
department for disassembly/assembly procedures.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
