3 - 2
Figure 3.2-1 — Motion Drop-Down Menu
Select
ENABLE
. The Motor Power menu appears (see Figure 3.2-2).
Figure 3.2-2 — Motor Power Menu
Select numbered axes buttons one-by-one to turn on the motors you have
connected to the specific axes, or select
ALL ON
to enable all motors.
Buttons for enabled and connected motors will illuminate green, and the
axis LED on the UniDrive will turn green to indicate a motor-on condition.
Click on an enabled button once to disable a motor, or select
ALL OFF
to
disable all motors. Buttons for disabled motors will illuminate yellow.
If a motor type is not defined (because no ESP-compatible stages are
detected) the button will not illuminate. If an axis is configured and motor
type defined, but the stage is not installed for a numbered axis, the button
will illuminate black. However, you will not be able to select the axis.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
