New Holland 200 Series, Operator'S Manual

Page: 71 / 292

3 - CONTROLS AND INSTRUMENTS
Foot pedals
931007501
1
Lift arm raise and lower control.
• The lift arm is controlled by the left foot pedal
(1) located on the floor and is marked with a decal. The lift arm is
raised by depressing the heel (rear) of the pedal. The lift arm is lowered by depressing the toe (front) of the pedal.
• The lift arm spool is equipped with a detented FLOAT circuit if the operator wants the lift arm to float over changing
ground contour. To put the valve in FLOAT position, depress the toe of the pedal until a slight jump is felt. In this
position, the pedal is locked in float and does not return to the neutral position unassisted, but will do so when light
pressure is applied to the heel of the pedal.
Bucket dump and curl control.
• The bucket is tilted by activation of the right foot pedal
(2) located on the floor and is marked with a decal. For
dumping, depress the toe end of the pedal. To achieve rollback (curl), push the pedal downward at the heel.
NOTE: There is no detent or float position on the bucket dump and curl spool.
3-11