New Holland 200 Series, Operator'S Manual

Page: 158 / 292

6 - WORKING OPERATIONS
Hydraulic attachment mounting systems
The optional hydraulic coupler allows the operator to remain in the operator seat and quickly change the loader arm
attachments.
The hydraulic coupler switch must be used in conjunction with the one of the three hydraulic functions (held to the
end of its stroke):
• The control lever’s auxiliary switch
• The loader arm down operation
• The attachment curl-in operation
To simplify the instructions only one of the three hydraulic functions is mentioned.
NOTE: If you have any questions about installing or removing attachments, contact your dealer.
Removing the attachment
1. Position the attachment above the dismount surface.
2. Press and hold the hydraulic coupler switch (1) in the
unlock direction. With the other hand activate and hold
the control lever’s auxiliary switch.
3. Continue to hold the switches as you watch for the red
markings on the indicator pins (2) to appear. Visible
red markings indicate the coupler is in the unlock po-
sition.
4. Release the control lever’s auxiliary switch and the
hydraulic coupler switch.
5. Place the attachment on the dismount surface, roll the
coupler out, and back the machine away from the at-
tachment.
93106917
1
93106838
2
6-4