New Holland 200 Series, Operator'S Manual

Page: 23 / 292

2 - SAFETY INFORMATION
Do not leave equipment in raised position while parked
or during service, unless securely supported. Hydraulic
cylinders must be mechanically locked or supported if
they are left in a raised position for service or access.
Loader buckets, forks, etc. or other lifting, handling, or
digging equipment and its load will change the center of
gravity of the machine. This can cause the machine to tip
on slopes or uneven ground.
Load items can fall off the loader bucket or lifting equip-
ment and crush the operator. Care must be taken when
lifting a load. Use proper lifting equipment.
Do not lift load higher than necessary. Lower loads to
transport. Remember to leave appropriate clearance to
the ground and other obstacles.
Equipment and associated loads can block visibility and
cause an accident. Do not operate with insufficient visi-
bility.
2-7