New Holland 200 Series, Operator'S Manual

Page: 123 / 292

3 - CONTROLS AND INSTRUMENTS
To modify the owner code:
Once in the LOCK menu, the display will show OWNER.
Press the POWER button to enter the OWNER menu.
The display will show open followed by 00000.
1. Enter the current owner code by using multiple
presses of the START button (2) , AUX OVERRIDE
button (4) , and OPERATE button (3) . Press the
POWER button (5) to save each digit and move to the
next.
NOTE: For numbers 1, 2, 3 use the START button.
For numbers 4, 5, 6 use the AUX OVERRIDE button.
For numbers 7, 8, 9, 0 use the OPERATE button.
2. Press the POWER button (5) after the fifth digit to save
the code. The display (1) will show the word OWNCR
followed by the saved owner code.
3. Enter a new owner code to overwrite the existing code.
The panel will return to the “Setup” menu.
RAIL15SSL0143CA
5
3-63