New Holland 200 Series, Operator'S Manual

Page: 242 / 292

7 - MAINTENANCE
6. Tip the lower edge of the glass into the cab and drop
down and out of the frame.
Fixed upper glass
7. Slip the screwdriver down into the aluminum track from
the back, and slide forward underneath the front inner
rigid PVC slider channel.
RAIL17SSL0349BA
5
8. Pry upward until you are able to grab hold of the end of
the PVC channel.
9. Using the flat drive end of the screwdriver, place it un-
der the edge of the outer PVC channel as shown and
pry the PVC channel up and out of the aluminum frame.
RAIL17SSL0322BA
6
10. Slide the fixed glass forward until it clears the remain-
ing PVC channel.
11. Tip the lower edge into the cab and drop down and out
of the frame.
7-78