manualshive.com logo in svg

Netopia 4000 Series, Software Manual

The Honeywell 4000 Series is a versatile product designed for convenience and efficiency. If you're looking for its detailed specifications, installation guidelines, or troubleshooting tips, our website offers free downloads of the product data manual. Access it easily at manualshive.com and maximize the potential of your Honeywell 4000 Series.

Share
Download
background image

2-44  Firmware User Guide

RFC-1483 Transparent  Bridging

This feature allows you to turn off the routing features and use your device as a bridge. If you select this option, 
the device will restar t itself, and reset all the settings to factor y defaults. Any configurations you have made will 
be erased. Use this feature with caution. If you decide to reinstate the routing capabilities, you must reconfigure 
the device from scratch.

From the 

Main Menu

, select 

System Configuration

.

Select 

Change Device to a Bridge

 and press 

Return

. You will be challenged to confirm this choice.

If you chose 

CONTINUE

, the device will reboot and restar t in bridge mode. Routing features will be disabled and 

the console menus corresponding configuration items, such as Easy Setup, will be removed.

                              System Configuration

                     IP Setup...
                     Filter Sets...
                     IP Address Serving...
                     Network Address Translation (NAT)...

                     Date and Time...

                     Console Configuration...
                     SNMP (Simple Network Management Protocol)...

                     Security...

                     Upgrade Feature Set...

                     Change Device to a Bridge...

                     Logging...

Use this screen if you want options beyond Easy Setup.

            +----------------------------------------------------+
            +----------------------------------------------------+
            | This change requires a reboot and will result      |
            | in Factory Defaulting the device.                  |
            |                                                    |
            |       CANCEL                        CONTINUE       |
            |                                                    |
            +----------------------------------------------------+

Summary of Contents for 4000 Series



























































































































































































































































































































Reviews:

No comments

Related manuals for 4000 Series

Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
H3C S5120V3-EI Series Manual preview
S5120V3-EI Series
Brand: H3C Pages: 54
H3C CR16000-M Installation Manual preview
CR16000-M
Brand: H3C Pages: 116
Queclink GV600 Series Instruction Manual preview
GV600 Series
Brand: Queclink Pages: 9
DCE ANS-205 User Manual preview
ANS-205
Brand: DCE Pages: 5
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Brand: Opengear Pages: 2
Multitech MultiConnect SE MTS2EA Quick Start Manual preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 8
IntesisBox IBOX-BAC Series Installation Sheet preview
IBOX-BAC Series
Brand: IntesisBox Pages: 2
Linksys WRT54GR - Wireless-G Broadband Router Quick Installation Manual preview
WRT54GR - Wireless-G Broadband Router
Brand: Linksys Pages: 81
TP-Link Archer MR500 User Manual preview
Archer MR500
Brand: TP-Link Pages: 110
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Brand: National Instruments Pages: 130
Paradyne Fan Tray 8820-S2-900 Installation Instructions Manual preview
Fan Tray 8820-S2-900
Brand: Paradyne Pages: 6
Lindsay Broadband LBON320AC Series Installation And Operation Manual preview
LBON320AC Series
Brand: Lindsay Broadband Pages: 4
Paradyne Hotwire 8343 Installation Instructions Manual preview
Hotwire 8343
Brand: Paradyne Pages: 6
Rasilient ApplianceStor 15MT User Manual preview
ApplianceStor 15MT
Brand: Rasilient Pages: 30
CopperOptics 150-1342-01 Manual preview
150-1342-01
Brand: CopperOptics Pages: 12
Cradlepoint wipipe CTR350 Quick Start Manual preview
wipipe CTR350
Brand: Cradlepoint Pages: 2

Brands by name

Popular brands

Load more brands