manualshive.com logo in svg

Netopia 4000 Series, Software Manual

The Honeywell 4000 Series is a versatile product designed for convenience and efficiency. If you're looking for its detailed specifications, installation guidelines, or troubleshooting tips, our website offers free downloads of the product data manual. Access it easily at manualshive.com and maximize the potential of your Honeywell 4000 Series.

Share
Download
background image

4-10  Firmware User Guide

them, acting as a home agent (

No

).

■

Tunnels are normally initiated 

On Demand

; however, you can disable this feature. When disabled, the 

tunnel must be manually established through the call management screens.

■

You can specify the 

Idle Timeout

, an inactivity timer, whose expiration will terminate the tunnel. A value of 

zero disables the timer. Because tunnels are subject to abrupt termination when the underlying datalink is 
torn down, use of the Idle Timeout is strongly encouraged.

■

Return to the Connection Profile screen by pressing Escape.

■

Select 

IP Profile Parameters

 and press Return. The IP Profile Parameters screen appears.

■

Enter the 

Remote IP Address

 and 

Remote IP Mask

 for the host to which you want to tunnel.

Encryption Support

Encr yption is a method for altering user data into a form that is unusable by anyone other than the intended 
recipient. The recipient must have the means to decr ypt the data to render it usable to them. The encr yption 
process protects the data by making it difficult for any third par ty to get at the original data.

Netopia PPTP is fully compatible with Microsoft Point-to-Point Encr yption (MPPE) data encr yption for user data 
transfer over the PPTP tunnel. Microsoft Windows NT Ser ver provides MPPE encr yption capability only when 
Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) is enabled. Netopia complies with this 
feature to allow MPPE only when MS-CHAP is negotiated. MS-CHAP and MPPE are user-selectable options in the 
PPTP Tunnel Options screen. If either the client or the ser ver side specifies encr yption, then encr yption 
becomes mandator y for both.

Netopia’s ATMP implementation suppor ts Data Encr yption Standard (DES) data encr yption for user data 
transfer over the ATMP tunnel between two Netopia routers. The encr yption option, none or DES, is a selectable 
option in the ATMP Tunnel Options screen.

                            IP Profile Parameters

         Address Translation Enabled:       Yes

         NAT Map List...                    Easy-PAT
         NAT Server List...                 Easy-Servers

         Local WAN IP Address:              0.0.0.0

         Remote IP Address:                 173.167.8.10
         Remote IP Mask:                    255.255.0.0

         Filter Set...
         Remove Filter Set

         RIP Profile Options...

Summary of Contents for 4000 Series



























































































































































































































































































































Reviews:

No comments

Related manuals for 4000 Series

Panasonic KX-UDS124 Maintenance Tool Manual preview
KX-UDS124
Brand: Panasonic Pages: 24
Panasonic i-Pro WV-SP302 Speci?Cations preview
i-Pro WV-SP302
Brand: Panasonic Pages: 2
Panasonic BB-HCM381A - Network Camera Troubleshooting Manual preview
BB-HCM381A - Network Camera
Brand: Panasonic Pages: 28
Panasonic BB-HCM381A - Network Camera Installation Manual preview
BB-HCM381A - Network Camera
Brand: Panasonic Pages: 2
Patton electronics 2888 Getting Started Manual preview
2888
Brand: Patton electronics Pages: 51
QNAP QMiroPlus-201W Quick Installation Manual preview
QMiroPlus-201W
Brand: QNAP Pages: 20
XYZ Machine Tools TRAK 2OP M11 Mill Safety, Installation, Maintenance, Service And Parts List preview
TRAK 2OP M11 Mill
Brand: XYZ Machine Tools Pages: 203
Kontron 50099 067 User Manual preview
50099 067
Brand: Kontron Pages: 42
Rajant Corporation BreadCrumb CX1 User Manual preview
BreadCrumb CX1
Brand: Rajant Corporation Pages: 40
OneAccess One80XM Installation Manual preview
One80XM
Brand: OneAccess Pages: 47
SainSmart Genmitsu CNC Assembly Instruction Manual preview
Genmitsu CNC
Brand: SainSmart Pages: 12
Ruckus Wireless SmartZone 3.2 Quick Setup Manual preview
SmartZone 3.2
Brand: Ruckus Wireless Pages: 4
Teltonika RUT955 User Manual preview
RUT955
Brand: Teltonika Pages: 12
Korenix 5-port 10/100 Specifications preview
5-port 10/100
Brand: Korenix Pages: 3
SEOWON INTECH SWC-2100 (VoIP CPE) User Manual preview
SWC-2100 (VoIP CPE)
Brand: SEOWON INTECH Pages: 46
Crestron NAT Reference Manual preview
NAT
Brand: Crestron Pages: 22
MC Technologies MC-MRE User Manual preview
MC-MRE
Brand: MC Technologies Pages: 46
Edimax 3G-6200nL V2 User Manual preview
3G-6200nL V2
Brand: Edimax Pages: 110

Brands by name

Popular brands

Load more brands