manualshive.com logo in svg

Netopia 4000 Series, Software Manual

The Honeywell 4000 Series is a versatile product designed for convenience and efficiency. If you're looking for its detailed specifications, installation guidelines, or troubleshooting tips, our website offers free downloads of the product data manual. Access it easily at manualshive.com and maximize the potential of your Honeywell 4000 Series.

Share
Download
background image

Internet Key Exchange (IKE) IPsec Key Management for VPNs   5-11

The 

Key Management

 pop-up menu at the top of the IPsec Tunnel Options screen allows you to choose 

between IKE key management (the default for a new IPsec profile) and Manual key management.

If you select 

Manual

, the IKE Phase 1 Profile option does not display, and you must enter your IPsec Manual 

Keys under the IPsec Manual Keys screen. See 

“IPsec Manual Key Entr y” on page 19

.

■

The 

IKE Phase 1 Profile

 pop-up menu allows you to associate an IKE Phase 1 Profile with the IPsec tunnel. 

An IKE Phase 1 Profile specifies the set of parameters that will be used for the IKE Phase 1 exchange. IKE 
Phase 1 Profiles may be shared by multiple IPsec tunnels. The pop-up menu item displays the name of the 
currently associated IKE Phase 1 Profile, if any, or is blank if no IKE Phase 1 profile is associated with the 
tunnel.

The pop-up menu lists the names of all currently defined IKE Phase 1 Profiles. The pop-up menu also 
includes an <<ADD PH1 PROFILE>> item to allow you to define a new IKE Phase 1 Profile directly without 
first going to the IPsec Configuration screen, and a <<NONE>> item to allow you to dissociate an existing 
IKE Phase 1 Profile from the IPsec tunnel.

The remainder of the screen allows you to configure the IKE Phase 2 parameters that control the contents of 
the single IKE Phase 2 proposal sent by the router. These same items specify the values that must be offered 
by one of the remote peer’s proposals.

■

The 

Encapsulation

 pop-up menu allows you to select what IPsec encapsulations will be used: ESP only (the 

default), AH only, or AH+ESP (both AH and ESP).

■

An 

AH Authentication Transform

 pop-up menu (which is visible only if you have selected AH or AH+ESP 

encapsulation) allows you to specify the type of AH authentication: HMAC-MD5-96 or HMAC-SHA1–96.

■

The 

ESP Encryption Transform

 pop-up menu (which is visible only if you have selected ESP or AH+ESP 

encapsulation) allows you to specify the type of ESP encr yption: DES, 3DES, or NULL (no encr yption).

■

The 

ESP Authentication Transform

 pop-up menu (which is visible only if you have selected ESP or AH+ESP 

encapsulation) allows you to specify the type of ESP authentication: None, HMAC-MD5-96, or 
HMAC-SHA1–96.

If you select 

Advanced IPsec Options

, the Advanced IPsec Options screen appears.

Summary of Contents for 4000 Series



























































































































































































































































































































Reviews:

No comments

Related manuals for 4000 Series

NEC Express5800/E120d-M Getting Started preview
Express5800/E120d-M
Brand: NEC Pages: 2
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Brand: Idis Pages: 86
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Brand: Paradyne Pages: 20
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Brand: Paradyne Pages: 2
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23
Garland INT10G10SP2 User Manual preview
INT10G10SP2
Brand: Garland Pages: 6
TP-Link TD-8817 Specifications preview
TD-8817
Brand: TP-Link Pages: 3
ADC PG-FlexPlus AMU-912 Manual preview
PG-FlexPlus AMU-912
Brand: ADC Pages: 130
IBM totalstorage 200 Service Manual preview
totalstorage 200
Brand: IBM Pages: 180
Gbord EN-101 User Manual preview
EN-101
Brand: Gbord Pages: 8
B&B Electronics Elinx EIR510 Series Quick Start Manual preview
Elinx EIR510 Series
Brand: B&B Electronics Pages: 2
Casablanca W-500 Technical Bulletin preview
W-500
Brand: Casablanca Pages: 13
Tripp Lite N310-30M Specification Sheet preview
N310-30M
Brand: Tripp Lite Pages: 2
Addonics Technologies Network Adapter ADZIFCF Installation Manual preview
Network Adapter ADZIFCF
Brand: Addonics Technologies Pages: 1
Juniper TX MATRIX Hardware Manual preview
TX MATRIX
Brand: Juniper Pages: 396
NetComm 4GM3W User Manual preview
4GM3W
Brand: NetComm Pages: 65
8e6 Technologies HL-002-006 Quick Start Manual preview
HL-002-006
Brand: 8e6 Technologies Pages: 94
Dahua Technology VDA-NVR2108W4KS2 User Manual preview
VDA-NVR2108W4KS2
Brand: Dahua Technology Pages: 363

Brands by name

Popular brands

Load more brands