manualshive.com logo in svg

NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 73 / 569

Share
Download
NETGEAR ProSafe GSM7228PS Cli Manual Download Page 73

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3

Switching Commands

3-35

v1.0, May 2010

no vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All 
mode, untagged frames or priority frames received on this interface are accepted and assigned the 
value of the interface VLAN ID for this port. With either option, VLAN tagged frames are 
forwarded in accordance with the IEEE 802.1Q VLAN Specification.

vlan port ingressfilter all

This command enables ingress filtering for all ports. If ingress filtering is disabled, frames 
received with VLAN IDs that do not match the VLAN membership of the receiving interface are 
admitted and forwarded to ports that are members of that VLAN.

no vlan port ingressfilter all

This command disables ingress filtering for all ports. If ingress filtering is disabled, frames 
received with VLAN IDs that do not match the VLAN membership of the receiving interface are 
admitted and forwarded to ports that are members of that VLAN.

vlan port pvid all

This command changes the VLAN ID for all interface.

Format

no vlan port acceptframe all

Mode

Global Config

Default

disabled

Format

vlan port ingressfilter all

Mode

Global Config

Format

no vlan port ingressfilter all

Mode

Global Config

Default

1

Format

vlan port pvid all 

<1-4093>

Mode

Global Config

Summary of Contents for ProSafe GSM7228PS


























































































































































































































































































































































































































































































































































































Reviews:

No comments