ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Switching Commands
3-9
v1.0, May 2010
show port description
This command displays the port description for every port.
show port status
This command displays the Protocol-Based VLAN information for either the entire system, or for
the indicated group.
Format
show port description
<unit/slot/port>
Mode
Privileged EXEC
Term
Definition
Interface
Valid slot and port number separated by forward slashes
Description
Shows the port description configured via the “description” command
Format
show port status
{<unit/slot/port> | all}
Mode
Privileged EXEC
Term
Definition
Interface
Valid slot and port number separated by forward slashes.
Media Type
“Copper” or “Fiber” for combo port.
STP Mode
Indicate the spanning tree mode of the port.
Physical Mode
Either “Auto” or fixed speed and duplex mode.
Physical Status
The actual speed and duplex mode.
Link Status
Whether the link is Up or Down.
Loop Status
Whether the port is in loop state or not.
Partner Flow
Control
Whether the remote side is using flow control or not.