manualshive.com logo in svg

NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 13 / 569

Share
Download
NETGEAR ProSafe GSM7228PS Cli Manual Download Page 13

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3

-xiii

v1.0, May 2010

•

Typographical Conventions

.

 

This manual uses the following typographical conventions::

•

Formats

.

 

This manual uses the following formats to highlight special messages:

•

Scope

.

 

This manual is written for the 7200 Series Switches.

Italic

Emphasis, books, CDs, file and server names, extensions

Bold

User input, IP addresses, GUI screen text

Fixed

Command prompt, CLI text, code 

italic

URL links

Note: 

This format is used to highlight information of importance or special interest.

Tip: 

This format is used to highlight a procedure that will save time or resources.

Warning: 

Ignoring this type of note may result in a malfunction or damage to the 

equipment.

Danger: 

This is a safety warning. Failure to take heed of this notice may result in 

personal injury or death.

Product Version

ProSafe 7200 Series Stackable Managed Switches

Manual Publication Date

May 2010

Note: 

Product updates are available on the NETGEAR, Inc. website at

http://kbserver.netgear.com

Summary of Contents for ProSafe GSM7228PS


























































































































































































































































































































































































































































































































































































Reviews:

No comments