NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 486 / 569

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Management Commands 8-70
v1.0, May 2010
priority
Use the
priority
command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The
<priority>
parameter specifies the
priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
timeout
Use the
timeout
command in TACACS Configuration mode to specify the timeout value in
seconds. If no timeout value is specified, the global value is used. The
<timeout>
parameter has
a range of 1-30 and is the timeout value in seconds.
show tacacs
Use the
show tacacs
command to display the configuration and statistics of a
server.
Default 0
Format
priority <priority>
Mode TACACS Config
Format
timeout <timeout>
Mode TACACS Config
Format
show tacacs [<ip-address|hostname>]
Mode Privileged EXEC
Term Definition
Host Address The IP address or hostname of the configured server.
Port The configured server port number.
TimeOut The timeout in seconds for establishing a TCP connection.
Priority The preference order in which servers are contacted. If a server
connection fails, the next highest priority server is contacted.