manualshive.com logo in svg

NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 143 / 569

Share
Download
NETGEAR ProSafe GSM7228PS Cli Manual Download Page 143

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3

Switching Commands

3-105

v1.0, May 2010

port-channel adminmode 

This command enables a port-channel (LAG). This command sets every configured port-channel 
with the same administrative mode setting.

no port-channel adminmode

This command disables a port-channel (LAG). This command clears every configured port-
channel with the same administrative mode setting.

port-channel linktrap

This command enables link trap notifications for the port-channel (LAG). The interface is a logical 
unit/slot/port for a configured port-channel. The option 

all 

enables link trap notifications for 

all the 

configured port-channels.

no port-channel linktrap

This command disables link trap notifications for the port-channel (LAG). The interface is a 
logical slot and port for a configured port-channel. The option 

all 

disables link trap notifications 

for all the configured port-channels.

Format

port-channel adminmode

 all

Mode

Global Config

Format

no port-channel adminmode

 [all]

Mode

Global Config

Default

enabled

Format

port-channel linktrap 

{<logical unit/slot/port> | all}

Mode

Global Config

Format

no port-channel linktrap 

{<logical unit/slot/port> | all}

Mode

Global Config

Summary of Contents for ProSafe GSM7228PS


























































































































































































































































































































































































































































































































































































Reviews:

No comments