manualshive.com logo in svg

NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 347 / 569

Share
Download
NETGEAR ProSafe GSM7228PS Cli Manual Download Page 347

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3

Utility Commands

7-21

v1.0, May 2010

no logging syslog

This command disables syslog logging.

show logging 

This command displays logging configuration information.

show logging buffered

This command displays buffered logging (system startup and system operation logs).

Format

no logging syslog

Mode

Global Config

Format

show logging

Mode

Privileged EXEC

Term

Definition

Logging Client 
Local Port

Port on the collector/relay to which syslog messages are sent.

CLI Command 
Logging

Shows whether CLI Command logging is enabled.

Console Logging

Shows whether console logging is enabled.

Console Logging 
Severity Filter

The minimum severity to log to the console log. Messages with an equal or lower 
numerical severity are logged.

Buffered 
Logging

Shows whether buffered logging is enabled.

Syslog Logging

Shows whether syslog logging is enabled.

Log Messages 
Received

Number of messages received by the log process. This includes messages that are 
dropped or ignored.

Log Messages 
Dropped

Number of messages that could not be processed due to error or lack of resources.

Log Messages 
Relayed

Number of messages sent to the collector/relay.

Format

show logging buffered

Mode

Privileged EXEC

Summary of Contents for ProSafe GSM7228PS


























































































































































































































































































































































































































































































































































































Reviews:

No comments