ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Switching Commands
3-121
v1.0, May 2010
ip dhcp snooping database write-delay
Use this command to configure the interval in seconds at which the DHCP Snooping database will
be persisted. The interval value ranges from 15 to 86400 seconds.
no ip dhcp snooping database write-delay
Use this command to set the write delay value to the default value.
ip dhcp snooping binding
Use this command to configure static DHCP Snooping binding.
no ip dhcp snooping binding <mac-address>
Use this command to remove the DHCP static entry from the DHCP Snooping database.
Default
local
Format
ip dhcp snooping database {local|tftp://hostIP/filename}
Mode
Global Config
Default
300 seconds
Format
ip dhcp snooping database write-delay <
in seconds
>
Mode
Global Config
Format
no ip dhcp snooping database write-delay
Mode
Global Config
Format
ip dhcp snooping binding <
mac-address
> vlan <
vlan id
> <
ip address
>
interface <
interface id
>
Mode
Global Config