ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Utility Commands
7-45
v1.0, May 2010
domain-name
This command specifies the domain name for a DHCP client. The
<domain>
specifies the
domain name string of the client.
no domain-name
This command removes the domain name.
netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that
are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command line.
Servers are listed in order of preference (address1 is the most preferred server, address2 is the next
most preferred server, and so on).
no netbios-name-server
This command removes the NetBIOS name server list.
Default
none
Format
domain-name <domain>
Mode
DHCP Pool Config
Format
no domain-name
Mode
DHCP Pool Config
Default
none
Format
netbios-name-server <address> [<address2>...<address8>]
Mode
DHCP Pool Config
Format
no netbios-name-server
Mode
DHCP Pool Config