manualshive.com logo in svg

NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 145 / 569

Share
Download
NETGEAR ProSafe GSM7228PS Cli Manual Download Page 145

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3

Switching Commands

3-107

v1.0, May 2010

Load-balancing is not supported on every device.  The range of options for load-balancing may 
vary per device.

no port-channel load-balance

This command reverts to the default load balancing configuration.

Default

3

Format

port-channel load-balance  {

 1 

|

 2 

|

 3 

|

 4 

|

 5 

|

 6 

} {

<unit/slot/

port> 

|<

all

>}

Mode

Interface Config
Global Config

Term

Definition

1

Source MAC, VLAN, EtherType, and incoming port associated with the packet

2

Destination MAC, VLAN, EtherType, and incoming port associated with the packet

3

Source/Destination MAC, VLAN, EtherType,  and incoming port associated with the packet

4

Source IP and Source TCP/UDP fields of the packet

5

Destination IP and Destination TCP/UDP Port fields of the packet

6

Source/Destination IP and source/destination TCP/UDP Port fields of the packet

<unit/slot/
port>| all

Global Config Mode only: The interface is a logical unit/slot/port number of a configured port-
channel.  "All" applies the command to all currently configured port-channels.

Format

no port-channel load-balance {<

unit/slot/port

> | <

all

>}

Mode

Interface Config
Global Config

Term

Definition

<unit/slot/
port>| all

Global Config Mode only: The interface is a logical unit/slot/port number of a configured port-
channel.  "All" applies the command to all currently configured port-channels.

Summary of Contents for ProSafe GSM7228PS


























































































































































































































































































































































































































































































































































































Reviews:

No comments