manualshive.com logo in svg

NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 318 / 569

Share
Download
NETGEAR ProSafe GSM7228PS Cli Manual Download Page 318

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3

Quality of Service (QoS) Commands

6-42

v1.0, May 2010

no ip access-group

This command removes a specified IP ACL from an interface.

acl-trapflags

This command enables the ACL trap mode.

no acl-trapflags

This command disables the ACL trap mode.

show ip access-lists

This command displays an IP ACL 

<accesslistnumber>

 is the number used to identify the 

IP ACL.

Default

none

Format

no ip access-group <accesslistnumber> [vlan <vlan-id>]

 

in 

Mode

• Interface Config
• Global Config

Default

disabled

Format

acl-trapflags

Mode

Global Config

Format

no acl-trapflags

Mode

Global Config

Format

show ip access-lists <accesslistnumber>

Mode

Privileged EXEC

Note: 

Only the access list fields that you configure are displayed.

Summary of Contents for ProSafe GSM7228PS


























































































































































































































































































































































































































































































































































































Reviews:

No comments