manualshive.com logo in svg

NETGEAR ProSafe GSM7228PS, Cli Manual, Page: 358 / 569

Share
Download
NETGEAR ProSafe GSM7228PS Cli Manual Download Page 358

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3

Utility Commands

7-32

v1.0, May 2010

nvram:errorlog

<url>

Copies the error log file to a server.

nvram:Switch CLI.cfg

<url>

Uploads the binary config file to a server.

nvram:log

<url>

Copies the log file to a server.

nvram:script 
<scriptname>

<url>

Copies a specified configuration script file to a server.

nvram:startup-config

nvram:backup-config

Copies the startup configuration to the backup 
configuration.

nvram:startup-config

<url>

Copies the startup configuration to a server.

nvram:traplog

<url>

Copies the trap log file to a server.

system:running-config

nvram:startup-config

Saves the running configuration to nvram.

<url>

nvram:clibanner

Downloads the CLI banner to the system.

<url>

nvram:Switch CLI.cfg

Downloads the binary config file to the system.

<url>

nvram:script 
<destfilename>

Downloads a configuration script file to the system. 
During the download of a configuration script, the copy 
command validates the script. In case of any error, the 
command lists all the lines at the end of the validation 
process and prompts you to confirm before copying the 
script file.

<url>

nvram:script 
<destfilename> noval

When you use this option, the copy command will not 
validate the downloaded script file. An example of the 
CLI command follows:

(NETGEAR Switch CLI Routing) #copy tftp://1.1.1.1/file.scr nvram:script file.scr 

<url>

nvram:sshkey-dsa

Downloads an SSH key file. For more information, see 

“Secure Shell (SSH) Commands” on page 8-16

. 

<url>

nvram:sshkey-rsa1

Downloads an SSH key file.

<url>

nvram:sshkey-rsa2

Downloads an SSH key file.

<url>

nvram:sslpem-dhweak

Downloads an HTTP secure-server certificate.

<url>

nvram:sslpem-dhstrong

Downloads an HTTP secure-server certificate.

<url>

nvram:sslpem-root

Downloads an HTTP secure-server certificate. For 
more information, see 

“Hypertext Transfer Protocol 

(HTTP) Commands” on page 8-20

.

<url>

nvram:sslpem-server

Downloads an HTTP secure-server certificate.

<url>

nvram:startup-config

Downloads the startup configuration file to the system.

<url>

nvram:system-image

Downloads a code image to the system.

<url>

nvram:license-key

Download the license date to the system.

Source

Destination

Description

Summary of Contents for ProSafe GSM7228PS


























































































































































































































































































































































































































































































































































































Reviews:

No comments