Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
VLAN Commands
6-3
v1.0, February 2007
6.1.4.1 no vlan acceptframe
This command sets the frame acceptance mode per interface to Admit All. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and
assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
vlan acceptframe {vlanonly | all}
Mode
Interface Config
6.1.5 vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Default
disabled
Format
vlan ingressfilter
Mode
Interface Config
6.1.5.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received
with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Format
no vlan ingressfilter
Mode
Interface Config
6.1.6 vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP
registration) to a static VLAN (one that is permanently configured and defined). The ID is
a valid VLAN identification number. VLAN range is 2-4094.
Format
vlan makestatic <2-4094>
Mode
VLAN Config
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
