manualshive.com logo in svg

NETGEAR GSM7224 - Switch, Cli Reference Manual

Share
Download
NETGEAR GSM7224 - Switch Cli Reference Manual Download Page 194

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

12-4

Port-Channel/LAG (802.3ad) Commands

v1.0, February 2007

12.1.6.1  no port-channel staticcapability

This command disables the support of static port-channels on the device.

Format  

no port-channel staticcapability

Mode  

Global Config

12.1.7 port lacpmode 

This command enables Link Aggregation Control Protocol (LACP) on a port.

Default  

enabled

 

Format   

port lacpmode 

Mode   

Interface Config

12.1.7.1  no port lacpmode 

This command disables Link Aggregation Control Protocol (LACP) on a port. 

Format   

no port lacpmode 

Mode   

Interface Config

12.1.8 port lacpmode all 

This command enables Link Aggregation Control Protocol (LACP) on all ports.

Format   

port lacpmode all

Mode   

Global Config

12.1.8.1  no port lacpmode all 

This command disables Link Aggregation Control Protocol (LACP) on all ports. 

Format   

no port lacpmode all 

Mode   

Global Config

12.1.9 port-channel adminmode 

This command enables a port-channel (LAG). The option 

all 

sets every configured port-

channel with the same administrative mode setting.

Format  

port-channel adminmode [all]

Mode  

Global Config

Summary of Contents for GSM7224 - Switch





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands