Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Port-Channel/LAG (802.3ad) Commands
12-3
v1.0, February 2007
12.1.4 port-channel
This command configures a new port-channel and generates a logical slot/port number for
the port-channel. The
<name>
field is a character string which allows the dash “-”
character as well as alphanumeric characters. Display this number using the
show port
channel
command.
Format
port-channel <name>
Mode
Global Config
12.1.4.1 no port-channel
This command deletes a port-channel (LAG).
Format
no port-channel {<logical slot/port> | all}
Mode
Global Config
12.1.5 clear port-channel
Use this command to clear all configured port channels.
Format
clear port-channel
Mode
Privileged EXEC
12.1.6 port-channel staticcapability
This command enables the support of port-channels (static link aggregations) on the
device. By default, the static capability for all port-channels is disabled.
Default
disabled
Format
port-channel staticcapability
Mode
Global Config
Note:
Before you include a port in a port-channel, set the port physical mode. For
more information, see
Section 4.1.11 “speed” on page 4-5
.
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
