Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
15-18
System Maintenance Commands
v1.0, February 2007
15.2.2 clear config
This command resets the configuration to the factory defaults without powering off the
switch. When you issue this command, a prompt appears to confirm that the reset should
proceed. When you enter
y
, you automatically reset the switch.
Format
clear config
Mode
Privileged EXEC
15.2.3 clear counters
This command clears the statistics for a specified
<slot/port>,
for all the ports, or for
the entire switch based upon the argument.
Format
clear counters {<slot/port> | all}
Mode
Privileged EXEC
15.2.4 clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and attempts to
delete these entries from the Multicast Forwarding Database.
Format
clear igmpsnooping
Mode
Privileged EXEC
15.2.5 clear pass
This command resets all user passwords to the factory defaults without powering off the
switch. You are prompted to confirm that the password reset should proceed.
Format
clear pass
Mode
Privileged EXEC
15.2.6 enable passwd
This command prompts you to change the Privileged EXEC password.
Format
enable passwd
Mode
User EXEC
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
