manualshive.com logo in svg

NETGEAR GSM7224 - Switch, Cli Reference Manual

Share
Download
NETGEAR GSM7224 - Switch Cli Reference Manual Download Page 110

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

6-4

VLAN Commands

v1.0, February 2007

6.1.7 vlan name

This command changes the name of a VLAN. The name is an alphanumeric string of up to 
32 characters, and the ID is a valid VLAN identification number. ID range is 1-4094.

Default  

VLAN ID 1 - default; other VLANS - blank string

Format  

vlan name <2-4094> <name>

Mode  

VLAN Config

6.1.7.1  no vlan name

This command sets the name of a VLAN to a blank string.

Format  

no vlan name <2-4094>

Mode  

VLAN Config

6.1.8 vlan participation

This command configures the degree of participation for a specific interface in a VLAN. 
The ID is a valid VLAN identification number, and the interface is a valid interface 
number

.

Format  

vlan participation {exclude | include | auto} <1-

4094>

Mode  

Interface Config

Participation options are: 

include  

The interface is always a member of this VLAN. This is 
equivalent to registration fixed.

exclude  

The interface is never a member of this VLAN. This is equiv-
alent to registration forbidden.

auto  

The interface is dynamically registered in this VLAN by 
GVRP. The interface will not participate in this VLAN unless 
a join request is received on this interface. This is equivalent 
to registration normal.

Summary of Contents for GSM7224 - Switch





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands