manualshive.com logo in svg

NETGEAR GSM7224 - Switch, Cli Reference Manual

Share
Download
NETGEAR GSM7224 - Switch Cli Reference Manual Download Page 187

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

Port-Based Access and Authentication Commands

11-17

v1.0, February 2007

11.2.7.1  no radius server timeout

This command sets the timeout value to the default value.

Format  

no radius server timeout

Mode  

Global Config

11.2.8 show radius

This command is used to display the various RADIUS configuration items for the switch 
as well as the configured RADIUS servers. Format

show radius [servers]

Mode  

Privileged EXEC

Primary Server IP 
Address  

Shows the configured server currently in use for authentica-
tion.

Number of 
configured 
servers   

The configured IP address of the authentication server.

Max number of 
retransmits  

The configured value of the maximum number of times a 
request packet is retransmitted.

Timeout Duration  

The configured timeout value, in seconds, for request re-
transmissions.

Accounting 
Mode  

Yes or No.

If you include the optional 

[servers]

 parameter, the following information regarding the 

configured RADIUS servers is displayed.

IP Address  

IP Address of the configured RADIUS server.

Port   

The port in use by this server.

Type  

Primary or secondary.

Secret 
Configured  

Yes / No.

Message 
Authenticator  

Enables or disables. the message authenticator attribute for 
the selected server.

Summary of Contents for GSM7224 - Switch





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands