Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
9-4
Port-Based Traffic Control Commands
v1.0, February 2007
9.1.6 show port-security
This command displays the port-security settings for the entire system.
Format
show port-security
Mode
Privileged EXEC
Admin Mode
Port Locking mode for the entire system
9.1.7 show port-security
This command displays the port-security settings for a particular interface or all interfaces.
Format
show port-security
<interface | all>
Mode
Privileged EXEC
Interface Admin
Mode
Port Locking mode for the Interface.
Dynamic Limit
Maximum dynamically allocated MAC Addresses.
Static Limit
Maximum statically allocated MAC Addresses.
Violation Trap
Mode
Whether violation traps are enabled.
9.1.8 show port-security dynamic
This command displays the dynamically locked MAC addresses for port.
Format
show port-security dynamic
<interface>
Mode
Privileged EXEC
MAC Address
MAC Address of dynamically locked MAC.
9.1.9 show port-security static
This command displays the statically locked MAC addresses for port.
Format
show port-security static <interface>
Mode
Privileged EXEC
MAC Address
MAC Address of statically locked MAC.
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
