Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Quality of Service (QoS) Commands
14-37
v1.0, February 2007
IP Extended ACL:
Format
access-list <100-199> {deny | permit} {every |
{{icmp | igmp | ip | tcp | udp | <number>} <srcip>
<srcmask>[{eq {<portkey> | <portvalue>} <dstip>
<dstmask> [{eq {<portkey>| <portvalue>}] [prece-
dence <precedence> | tos <tos> <tosmask> | dscp
<dscp>] [assign-queue <queue-id>]
Mode
Global Config
14.8.1.1 no access-list
This command deletes an IP ACL that is identified by the parameter
<
accesslistnumber>
from the system
.
Format
no access-list <accesslistnumber>
Mode
Global Config
14.8.2 ip access-group
This command attaches a specified IP ACL to one interface or to all interfaces.
An optional sequence number may be specified to indicate the order of this IP access list
relative to other IP access lists already assigned to this interface and direction. A lower
number indicates higher precedence order. If a sequence number is already in use for this
interface and direction, the specified access list replaces the currently attached IP access
list using that sequence number. If the sequence number is not specified for this command,
a sequence number that is one greater than the highest sequence number currently in use
for this interface and direction is used.
Default
none
Format
ip access-group <accesslistnumber> in [sequence
<1-4294967295>]
Modes
Interface Config
Global Config
14.8.2.1 no ip access-group
This command removes a specified IP ACL from an interface.
Default
none
Format
no ip access-group <accesslistnumber> in
Mode
Interface Config
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
