Administrative Access Commands
3-1
v1.0, February 2007
Chapter 3
Administrative Access Commands
This section describes the management access and basic port configuration commands
available in the 7200 Series Managed Switch CLI.
This section contains the following topics:
•
Section 3.1 “Network Interface Commands” on page 3-1
•
Section 3.3 “Console Port Access Commands” on page 3-7
•
Section 3.4 “Telnet Commands” on page 3-10
•
Section 3.5 “Secure Shell (SSH) Command” on page 3-15
•
Section 3.6 “Hypertext Transfer Protocol (HTTP) Commands” on page 3-17
•
Section 3.7 “User Account Commands” on page 3-20
The commands in this section are divided into two functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
To manage the device by using SNMP, see
“SNMP Commands” in Chapter 10
.
3.1 Network Interface Commands
This section describes the commands you use to configure a logical interface for
management access.
3.1.1 enable
This command gives you access to the Privileged EXEC mode. From the Privileged
EXEC mode, you can configure the network interface.
Format
enable
Mode
User EXEC
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
