Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Administrative Access Commands
3-23
v1.0, February 2007
3.7.5.1 no users snmpv3 encryption
This command sets the encryption protocol to
none
. The
<username>
is the login user
name for which the specified encryption protocol will be used.
Format
no users snmpv3 encryption <username>
Mode
Global Config
3.7.6 show loginsession
This command displays current telnet and serial port connections to the switch.
Format
show loginsession
Mode
Privileged EXEC
ID
Login Session ID
User Name
The name the user will use to login using the serial port or
Telnet.
Connection From
IP address of the Telnet client machine or EIA-232 for the
serial port connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
3.7.7 show users
This command displays the configured user names and their settings. This command is
only available for users with Read/Write privileges.
The SNMPv3 fields will only be displayed if
SNMP is available on the system.
Format
show users
Mode
Privileged EXEC
User Name
The name the user enters to login using the serial port, Telnet
or Web.
Access Mode
Shows whether the user is able to change parameters on the
switch (Read/Write) or is only able to view them (Read
Only). As a factory default, the “admin” user has Read/Write
access and the “guest” has Read Only access. There can only
be one Read/Write user and up to five Read Only users.
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
