LAN Configuration
86
NETGEAR ProSAFE VPN Firewall FVS318G v2
IPv6 LAN Prefixes for Prefix Delegation
If you configure a
stateless
DHCPv6 server for the LAN and select the
Prefix Delegation
check box (both on the ISP Broadband Settings screen for IPv6 and on the LAN Setup
screen for IPv6), a prefix delegation pool is automatically added to the List of Prefixes for
Prefix Delegation table. You can also manually add prefixes to the List of Prefixes for Prefix
Delegation table to enable the DHCPv6 server to assign these prefixes to its IPv6 LAN
clients.
To add an IPv6 prefix:
1.
Log in to the unit:
a.
In the address field of any of the qualified web browsers, enter
https://192.168.1.1
.
The NETGEAR Configuration Manager Login screen displays.
b.
In the
Username
field, enter
admin
and in the
Password / Passcode
field, enter
password
.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c.
Click the
Login
button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2.
Select
Network Configuration > LAN Setup
.
The LAN Setup screen displays.
3.
In the upper right of the screen, select the
IPv6
radio button.
4.
Under the List of Prefixes for Prefix Delegation table, click the
Add
button.
5.
Enter the following settings:
•
IPv6 Prefix
. Enter a prefix, for example, 2001:db8::.
•
IPv6 Prefix Length
. Enter the IPv6 prefix length, for example, 64.
6.
Click the
Apply
button.
Your changes are saved.
To edit a prefix:
1.
Log in to the unit:
a.
In the address field of any of the qualified web browsers, enter
https://192.168.1.1
.
