Firewall Protection
148
NETGEAR ProSAFE VPN Firewall FVS318G v2
The DMZ WAN Rules screen displays. The
IPv4
radio button is selected by default. The
screen displays the IPv4 settings.
3.
Click the
Add
table button under the Outbound Services table.
4.
Enter the settings as described in
Table 29
on page 128.
In addition to selections from the
Service
,
Action
, and
Log
lists, you must make
selections from the following lists:
•
DMZ Users
•
WAN Users
Unless your selection from the
Action
list is
BLOCK always
, you also must make
selections from the following lists:
•
Select Schedule
•
QoS Priority
•
NAT IP
(This list is available only when the WAN mode is NAT. If you select
Single
Address
, the IP address specified must fall under the WAN subnet.)
5.
Click the
Apply
button.
Your changes are saved.
