manualshive.com logo in svg

NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router, Reference Manual

Share
Download
NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual Download Page 195

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

LAN Configuration

7-7

v1.0, May 2008

To configure the group assignment of a device that already appears in the The 

Known PCs and 

Devices 

table:

1.

Click the 

Edit

 button next to the device entry in the 

Known PCs and Devices 

table. The 

Edit 

Groups and Hosts

 menu appears.

2.

From the 

Group

 pull-down list, choose the group that this host will be assigned to.

3.

Click 

Apply

.

Changing the Group Names

Rather than using the default names (for example, Group2), you can change the group names to be 
more descriptive (for example, Marketing). To change a group name:

Figure 7-3

Summary of Contents for DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands