manualshive.com logo in svg

NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router, Reference Manual

Share
Download
NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual Download Page 182

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

6-24

Router and Network Management

v1.0, May 2008

3.

Click 

Add

 to create the new configuration. The entry will display in the 

SNMP 

Configuration 

table.

The 

SNMP System Info

 option arrow at the top of the tab opens the 

SNMP SysConfiguration

 

menu that displays the SNMP System contact information available to the SNMP manager. You 
can edit the System Contact, System Location, and System name.

To modify the SNMP System contact information:

1.

Click the 

SNMP System Info 

link. The 

SNMP SysConfiguration 

screen will display. 

2.

Modify any of the contact information that you want the SNMP Manager to use.

3.

Click 

Apply 

to save your settings.

Configuration File Management

The configuration settings of the ProSafe DGFV338 are stored within the firewall in a 
configuration file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the 
user’s PC, or cleared to factory default settings. 

Once you have installed the wireless firewall and have it working properly, you should back up a 
copy of your settings to a file on your computer. If necessary, you can later restore the wireless 
firewall settings from this file. The 

Settings Backup and Firmware Upgrade

 screen allows you 

to:

•

Back up and save a copy of your current settings

•

Restore saved settings from the backed-up file. 

Figure 6-15

Summary of Contents for DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands