DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
Router and Network Management
6-23
v1.0, May 2008
The SNMP Configuration table lists the SNMP configurations by:
•
IP Address
: The IP address of the SNMP manager.
•
Port
: The trap port of the configuration.
•
Community
: The trap community string of the configuration.
To create a new SNMP configuration entry:
1.
Select
Administration
from the main menu and
SNMP
from the submenu. The
SNMP
screen
displays.
2.
Configure the following fields in the
Create New SNMP Configuration Entry
section:
a.
Enter the IP Address of the SNMP manager in the
IP Address
field and the Subnet Mask
in the
Subnet Mask
field.
–
To allow only the host address to access the wireless firewall and receive traps, enter
an IP Address of, for example, 192.168.1.101 with a Subnet Mask of
255.255.255.
255
.
–
To allow a subnet access to the wireless firewall through SNMP, enter an IP address
of, for example,192.168.1.101 with a Subnet Mask of 255.255.255.
0
. The traps will
still be received on 192.168.1.101, but the entire subnet will have access through the
community string.
–
To make the wireless firewall globally accessible using the community string, but still
receive traps on the host, enter 0.0.0.0 as the Subnet Mask and an IP Address for
where the traps will be received.
b.
Enter the trap port number of the configuration in the
Port
field. The default is 162.
c.
Enter the trap community string of the configuration in the
Community
field.
Figure 6-14
