Ness IDTECK iCON100, User Manual

Page: 8 / 60

101-000 -8- Users Manual
IDTeck – iCON 1 DOOR ACCESS CONTROLLER
Time Schedule Setup
You can program 10 time schedules and apply one time schedule to each user. Each time schedule has
eight different time codes - Monday to Sunday and one holiday. Each time code has five different
time intervals, which allows you to program five different time periods to each day.
You can also program time schedules for individual inputs and outputs. To make a time schedule for
an input, you first have to setup its time codes. Your designated input is then activated during the time
codes on its time schedule.
Each time schedule can also be linked to a holiday schedule. This linked holiday is then governed by
the holiday time code of its time schedule.
Holiday Schedule Setup
Except for Sunday, you can program 32 holidays to one holiday schedule. Each holiday schedule is
linked to a time schedule, which has time codes set for holidays. You can program all holidays to
holiday schedules. The time code for a holiday is programmed to a holiday time intervals of a time
schedule.
Example: A. Holiday schedule 01 linked to time schedule 01,
Holiday schedule 02 linked to time schedule 02
B. Holiday schedule 02 linked to time schedule 01,
Holiday schedule 01 linked to time schedule 03
Forced Door Open Alarm
When a door is opened by force, a door contact sensor is activated. The door forced open alarm will
be generated until the door is closed. For this application, you have to install door contact sensors to
the door and properly set the door contact time as well as set outputs to alarm devices.
Duress Alarm/Alarm Arm – Disarm Feature
In case of duress or to arm or disarm an alarm panel, enter a two-digit password followed by the
<ENT> key. Then use the normal access process and the door will be opened as normal but a
duress/arm or disarm TTL output is generated at the same time and the event will be sent to the host
PC.