Ness IDTECK iCON100, User Manual

Page: 41 / 60

101-000 -41- Users Manual
IDTeck – iCON 1 DOOR ACCESS CONTROLLER
IN/OUT DEFINE
DISPLAY CURRENT SET <ENT>
SELECT INDEX
(USE '4','6' KEY)
ENTER NEW TIME OR T/S INDEX
(10 DIGIT OR EVEN DIGIT) + 'ENT'
<ENT>
NEXT?
NO
or <ESC>
YES or
Error
9.2.4 HOLIDAY INDEX SETTING
☞
.
The Holiday Index is to link the Holiday Schedule (H/S) to the Time
Schedule. You can setup one holiday index (01~10) to one T/S index
(01~10) so that the Holiday Time Code in the T/S can be applied for
the Holidays in the H/S. The default HOLIDAY CODE is ‘00’ which
means no holidays are applied to the T/S.
Select the HOLIDAY INDEX menu and press the <ENT> key, then
select the desired T/S_INDEX (01~10) by pressing the <4> or <6> key
then press the <ENT> key to input a 2 digit HOLIDAY CODE and the
<ENT> key.
T/S_INDEX 01
HOLIDAY CODE 00
HOLIDAY INDEX
☞
. You can program or deactivate each output to be generated and
choose how long (in seconds) they will last. There are default
values as seen in table 2 below.
IN/OUT DEFINE
☞ . Select input sources by changing the index No. with the keys <4>
or <6>, and press the <ENT> key. You’ll see a cursor blinking at
the first digit, from the left, of the five couples of digit, which
corresponds to relay 1, relay 2, TTL1, TTL2 and buzzer,
respectively. Then enter the delay times (refer to the table below)
one by one. Now, an inputs/outputs definition has been
completed. For further definitions, repeat the process. To end
defining inputs/outputs, press the <ESC> key, and you will see
the first figure of the menu.
Note
: The five couples of digits of [15] Output T/S and [16]
Input/Output T/S are time schedule indexes.
1.EXIT
03 00 00 00 00