Ness IDTECK iCON100, User Manual

Page: 39 / 60

101-000 -39- Users Manual
IDTeck – iCON 1 DOOR ACCESS CONTROLLER
9.2.1 REGISTERING AND CHANGING TIME SCHEDULE
TIME SCHEDULE DISPLAY CURRENT T/S
SELECT T/S NUMBER AND INDEX
(USE '2','8','4','6' KEY)
ENTER T/S(8 DIGIT)
(START TIME(hh:mm)-END TIME(hh:mm))
<ENT>
<ENT>
NEXT?
NO
or <ESC>
YES or
Error
☞ . Press the <2> or <8> key to adjust the Time Schedule (T/S)
number (1-10) and the day of the week (Mon-Sun and ‘HOL’).
Define which shift of the day (1-5), using the <4> and <6> key.
‘HOL’ refers to specific holidays that you can register (see 13.2.2
page 28). Press the <ENT> key, and the cursor will blink, then
enter the beginning time of the period, in the form of hour (2-
digit):minute (2-digit) and the ending time in the same form.
Then the lower line will indicate the defined period. For more
schedules, repeat the process. To end time scheduling, press the
<ESC> key.
☞
. Possible values for time scheduling
1) Time schedule number: 01 ~ 10 (Needed when IDs are registered)
2) A day of the week: MON, TUE, WED, THU, FRI, SAT, SUN, HOL
3) Index: 1 ~ 5 (referred to the five periods of time of a day)
☞
. You may program the time schedules to grant and restrict access
for each user. There can be up to ten different schedules. A
minimum of one schedule must be defined.
If only one schedule is programmed the most common setting
allows access for all users 24 hours / day. A time schedule can be
programmed for each day of the week and holidays, and five
shifts can be defined for each day. To set time schedules, press
the <ENT> key from this menu.
If you want to set time schedules, press the <ENT> key when this
figure is displayed.
TIME SCHEDULE
T/S: 01 HOL #1
00:00 - 00:00