Neopost IN-600 Series, User Manual

Page: 50 / 248

If you want to print several identical labels:
1.
Press and enter the number of labels.
Make sure there is enough labels are available in the label dispenser (see Filling the
Label Dispenser on page 80).
2. Press to print the labels.
In optional mode Differential Weighing ( ):
From the [ Standard ] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the instructions
on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the stamp, insert the mail piece into the base against the rear-guide wall, with
the side to be printed facing upwards.
If a mail piece is bigger than mail path maximum thickness, press
to print a label. The label is printed. To know the maximum
thickness, see Mail Specifications on page 231.
4. The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can answer
Yes or No .
3
Processing
Mail
43
| Page 43 | Nov-12-2015 10:25 |