Neopost IN-600 Series User Manual Download Page 151

Page: 151 / 248

Testing the Connection to Online Services

You may test the connection to the Online Services server via the commands in the Online
Services menu:

• Ping server

Establishes a connection and checks whether the server answers to a 'ping' command.
This test:

- Validates connection parameters (see

Connection Settings

on page 180).

- Indicates that the server can be contacted.

• Test server

Establishes a connection and tests the communication dialog with the server. This
test indicates that transactions can be held normally.

Test server is a bandwidth test and should only be undertaken after
a request from Customer Service.

How to Test the Connection to Online Services

To ping the server

As a user:

Press

and select the path:

Online Services

Ping server

Or, as supervisor (see

How to Log in as Supervisor

on page 152):

Press

and select the path:

Online Services

Ping server

144

| Page 144 | Nov-12-2015 10:25 |

Online

Services

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands