Neopost IN-600 Series User Manual Download Page 118

Page: 118 / 248

Select

Add operator

The Add operator screen is displayed.

Enter the options you wish to provide for this operator.

In the Account List screens, successively select the accounts that the operator will be
allowed to use. You can complete this step later: see

How to Assign Accounts to an

Operator

on page 113.

Press

[OK]

The Operator creation summary screen is displayed.

Press

[OK]

to create the Operator.

Modifying Operators

Follow the steps listed below to modify operator's name, PIN code, status or assigned
accounts.

Managing

Accounts

and

Assigning

Rights

111

| Page 111 | Nov-12-2015 10:25 |

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands