Neopost IN-600 Series User Manual Download Page 143

Page: 143 / 248

Meter errors

This report displays the list of errors encountered on the mailing system and related to the
meter.

Requirements

• To generate this report, you have to be logged in as the supervisor.

Outputs

• Screen
• USB Printer (optional)
• USB Key

Content

Comments

Fields

Reference code of the meter error: PSD-XX-YYY (XX is a 2–digit num-
ber, YYY is a 3–digit number).

Code

Date when error occured.

Date

Number of imprints when this error occured.

Cycles

See also

•

Generating a Report

on page 120.

IP Configuration Report

Requirements

To generate this report:

• you must be logged in as Supervisor.
• the mailing machine must be connected to the network with a LAN.

136

| Page 136 | Nov-12-2015 10:25 |

Reports

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands