Neopost IN-600 Series User Manual Download Page 202

Page: 202 / 248

Managing Postal Rates

9.6

Your Mailing System uses

rate tables

to calculate postage amounts.

As supervisor, you can:

• Display the list of rate tables and see which table the system is currently using
• Download new postal rate tables

New

rate tables are automatically downloaded

into your Mailing

System by connecting the Mailing System to the Online Services
server as a user. See

How to Load New Options

on page 189.

See also

•

Options and Updates

on page 183.

Displaying Rate Tables

The rate tables display all available rate tables that are currently installed in your Mailing

System and indicates with a check mark

the active rate table.

Rate tables will automatically become active on their effective date.

How to Check your Rate Updates

To display the list of rate tables:

As supervisor (see

How to Log in as Supervisor

on page 152):

Press

and select the path:

Options and Updates

Rate management

The list of rate tables is displayed in the Rate management screen. The tables are
identified by the effective date of the rate.

195

| Page 195 | | Nov-12-2015 10:25 |

Options

and

Updates

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands