Neopost IN-600 Series User Manual Download Page 187

Page: 187 / 248

Connection Settings

8.11

Connection to the Postal Services or Online Services

To add funds or access Online Services, the Mailing System can use the following networks:

• An Internet access through a high speed LAN (Local Area Network).

First use the procedure below to select the connection, then configure the connection.

LAN settings can only be performed if the machine was actually
connected to the LAN at power-up.

See also

• To physically connect the LAN to the base, see

Connection Diagram

on page 21.

How to Set the Postal/Online Services Connection

To set the Postal/Online Services connection:

As supervisor (see

How to Log in as Supervisor

on page 152):

Press

and select the path:

Communication settings

Type of connec-

tion

The Server Access screen is displayed.

If you did not have the LAN plugged into the system, you will get a
warning message.
Please follow the message: check your communication cable or
device and press OK.

Select

Server access

Select LAN.

For LAN settings, see

How to Set LAN (High-speed Internet) Parameters

on page 181.

See also

• To physically connect the LAN to the base, see

Connection Diagram

on page 21.

180

| Page 180 | Nov-12-2015 10:25 |

Configuring

your

Mailing

System

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands