Neopost IN-600 Series User Manual Download Page 179

Page: 179 / 248

Postage Imprint Default Set-
tings

8.9

The settings of the postage imprint 'by default' include:

•

Stamp default settings

: sets the default rate, ERA and ad die for mailing operations

•

Automatic Date Advance

: enables early date change to continue printing postage

with the new date after post office closing hours

•

Printing offset

: sets the default offset print position from the right side of the envelope.

Stamp Default Settings

You can set default parameters for the stamp elements that follow:

• Rate
• Prepaid imprint
• ERA
• Ad Die

On list screens, a mark

indicates the default parameter.

Changing the Default Rate

Use the procedure below to change the rate the machine activates at start-up.

How to Change the Default Rate

To change the default rate:

As supervisor (see

How to Log in as Supervisor

on page 152):

Press

and select the path:

Default user settings

Default imprint

parameters

Default rate

Select the default rate using the rate wizard.

Press

[OK]

to validate.

See also

•

Managing Postal Rates

on page 195.

172

| Page 172 | Nov-12-2015 10:25 |

Configuring

your

Mailing

System

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands